IXO 1:43 2005 Ford Escape Hybrid: Chicago Taxi

This model is sold in a blister pack

The Ford Escape is a compact crossover vehicle sold by Ford since 2000 over four generations.

The first generation of Ford Escape was released in 2000 for the 2001 model year. It was jointly developed with Mazda, in which Ford owned a controlling interest, and was released simultaneously with the Mazda Tribute. Both are built on the Ford CD2 platform, in turn based on the Mazda GF platform.

At the time, larger sport-utility vehicles tended to use pickup truck-based, body-on-frame designs. Other car makers, Jeep, Toyota and Honda had been offering smaller unibody designs, the Jeep Cherokee (XJ), RAV4 and CR-V respectively. Solid rear axles were commonly used on the full-sized truck-based SUVs and Jeep Cherokee due to their ability to carry heavy loads at the expense of a comfortable ride and good handling. Ford and Mazda decided to offer a car-like, unibody design with a fully independent suspension and rack and pinion steering similar to the RAV4 and CR-V in the Escape. Although not meant for serious off-roading, a full-time all-wheel-drive (AWD) system supplied by Dana was optional, which included a locking center differential activated by a switch on the dashboard. The AWD system normally sends most of the power from the engine to the front wheels. If slipping is detected at the front, more power will be sent to the rear wheels in a fraction of a second. The four wheel drive system was a newer version of Ford's "Control Trac" 4x4 system, dubbed the Control Trac II 4WD in the Escape. This system allowed the front wheels to receive 100% of the torque until a slip was detected. Using a Rotary Blade Coupling, the rear wheels could be sent up to 100% of the power in fractions of a second. When switching the system from "Auto" to "On," the front and rear axles are locked at a 50/50 split; the reaction time necessary to engage the rear wheels is reduced via an integrated bypass clutch. The Control Trac II system allows for a four-wheel drive vehicle without the use of a center differential. The entire braking system was built by Continental Teves, including the ABS and various related suspension components. CKD production began in 2002 at Ford Lio Ho Motor Co. in Taiwan for various Asian markets. One difference between the Tribute and the Ford Escape is that, in an effort to culture a sporty image, the Tribute's suspension is tuned for a firmer ride than the Escape.

Hybrid (2005–2007): Based on the midrange XLT trim level, the Hybrid included: the 2.3-liter DuraTec inline-four engine with an electric motor, power front bucket seats, low-back front bucket seats, enhanced partially-recycled cloth seating surfaces, and unique 16-inch alloy wheels. Options included a powered sunroof, a unique integrated GPS navigational system with hybrid information system, Sirius Satellite Radio, the seven-speaker premium audio system with amplifier and rear-mounted subwoofer, leather-trimmed seating surfaces, and a "two-tone" exterior paint scheme, with silver-painted lower exterior trim and front and rear bumpers.