Finished in custom candy red paint this model features opening doors, trunk and hood
It features a fully plumbed and wired 429 engine and a custom trim interior with a detailed chassis
The Boss 429 Mustang is a high performance Ford Mustang variant that was offered by Ford in 1969 and 1970.
The Boss 429 is recognized as being among some of the rarest and highly valued muscle cars to date. In total there were 1359 original Boss 429s made. The origin of the Boss 429 was to fulfill Ford's need to homologate the 429 semi-hemispherical engine for NASCAR racing. Ford was seeking to develop an engine that would better compete with the 426 Hemi from Chrysler in NASCAR's Grand National Division, now known as the Monster Energy Cup Series. NASCAR's homologation rules required that at least 500 cars be fitted with this motor and sold to the general public. After much consideration, it was decided by Ford that the Mustang would be the car that would house this new engine.
The Boss 429 engine evolved from the Ford 385 engine. It used four-bolt main caps, a forged steel crank and forged steel connecting rods. The engine featured aluminum cylinder heads, with a semi-hemispherical type combustion chamber which Ford called the "crescent". These heads used the "dry-deck" method, meaning the coolant circuit for the block was separate from the cooling circuit for the head The "dry-deck" method of design is intended to strengthen the block by removing the open coolant jackets around the cylinder and reduce hot spots by providing more direct cooling. Each cylinder, oil passage and water passage had an individual "O" ring style seal to seal it tight. Although a head gasket is used, it only seals the cylinder for combustion so a failure at one point won't compromise the others.
The Boss 429 engine came standard with a single Holley 4-barrel carburetor rated at 735 CFM mounted on an aluminum intake manifold that flowed well for its time. 1969 cars featured a hydraulic lifter camshaft while 1970 models got a mechanical lifter camshaft along with an improved dual exhaust system, though rated power output stayed the same.
The Mustang's engine compartment was not wide enough to accommodate the massive Boss 429 engine. As a result, Ford contracted with Kar Kraft of Dearborn, MI to modify 4-speed Cobra Jet Mustangs to accept the new Boss 429 Engine. Kar Kraft was a Ford exclusive experimental facility that functioned as Vehicle Engineering for Ford's Special Vehicles. Kar Kraft had previously developed the first GT40 MKII (winner of the 1966 24 Hours of Le Mans) and designed and built the GT40 MKIV (winner of the 1967 24 Hours of Le Mans).
Production of the Boss 429 began in 1968 at Kar Kraft's new assembly plant in Brighton, Michigan; the cars were transported to this plant directly from the Ford Rouge plant. The new, revised, front apron assemblies that accepted the large Boss 429 engine had been installed by the Rouge plant as the base vehicles were being built; this produced a stronger and cleaner front structure. The reworked front fenders were also installed at the Rouge plant.
Next the battery was relocated to the trunk and a 3/4" sway bar was added to the rear end to improve handling because the car was now nose heavy. This was the first Mustang ever fitted with a rear sway bar, and so it handled much better than the other large engine Mustangs of the time, making it a much more capable track car. It came fitted with an 8,000rpm tachometer, and AM only radio. In addition, a hole was cut in the hood, and a manually controlled hood scoop was added to these cars. Other features included a front spoiler that was shallower than the Boss 302 spoiler, color keyed dual racing mirrors, and an engine oil cooler. It was also equipped with a 3.91 ratio rear axle with a "Traction-Lock" limited slip differential.
Acme
This car debuted at the 1967 NHRA Spring Nationals in Bristol, Tennessee, and changed Gassers forever. It was at corporate Ford’s insistence that Ohio George race what Ford sold. This car proved so...
